Overview | Info/Download | Documentation | Sample Projects 
Making a GoGo board | Board Variations | Links | FAQ
 

GoGo Ballet 1.1

GoGo ballet is a simplified version of the GoGo with an addition of RF wireless communication. It was first designed for Roballet, a research project where children attach various sensors to their body allowing them to control the environment (light, sound, video projection) using their movements. GoGo ballet was designed as a fallback plan, as, for a short time, we were experiencing problems with another wireless board we wanted to use.

You will need a base station to communicate with GoGo Ballet. Information about this base station will be available soon.

Current Version:

  • GoGo Ballet 1.1 Sep 19, 2003


[Photo is of version 1.0]

Specifications & features:

  1. 20 MHz PIC 16F877 microcontroller.
  2. Eight sensor inputs (10 bits resolution).
  3. High speed RF transceiver (up to 64 kBps).
  4. I2C bus. Can be used to connect to expansion modules.
  5. Powered by 4xAA batteries.
  6. Two programmable LEDs.
  7. Large PCB pads for easy soldering.

Technical Information:

Firmware

  • Not yet available for download. The firmware for version 1.1 is undergoing some major changes, as we are implementing a TDMA protocol to allow multi-node access RF communication. We will release it after we have a stable beta version.

 

 

 Last updated: Sep 19, 2003